1 pasternacks PE5SC2001 offers excellent performance characteristics that is specially designed for the fne-tuning and calibration of sensitive test equipment in engineering labs, production environments, and quality testing facilities. all of our calibration kits & components are built to withstand years of rigorous use and provide accurate rf equipment calibration for the life of the product. pasternacks broad portfolio of test and measurement components offer users a variety of options that are technically and economically suitable for a broad spectrum of rf applications and environments. as a leading solutions provider of rf calibration instruments and compatible rf components, you can rely on pasternack to have all of the t&m products you need in-stock and available to ship same-day. features ? functional from dc to 26.5 ghz ? see pe5ck1000 for full standard kit which includes (9) 3.5mm short-open-load-thru (solt) components ? suitable for many 50 ohm network analyzers including, but not limited to: ? agilent / hp (n5222a/24a, n5225a/27a, n5232a, n5234a/35a, n5242a/44a, n5245/47a) ? rohde & schwarz (zvb, znb) ? anritsu (ms2038c, ms2028c, ms2027c, ms4640b) applications ? vna, full 2-port cal ? vna, thru cal ? vna, substitution cal method ? test & measurement ? lab equipment accessories ? engineering test and evaluation ? general purpose test and evaluation confguration connector 3.5mm male component type open circuit impedance 50 ohms frequency range dc to 26.5 ghz description minimum typical maximum units frequency range ghz impedance ohm phase, dc - 3 ghz 0.65 degrees phase, 3 - 8 ghz 1.2 degrees phase, 8 - 26.5 ghz 2 degrees item units ousin enter in onnector onnector scre threa inch dimensions inch mm et eiht electrical specifications d mechanical specifications description ol plate opper ol plate eryllium hm mm male us click the following link (or enter part number in search on website) to obtain additional part information including price, inventory and certifcations: 3.5mm male general purpose calibration kit component open circuit operating from dc to 26.5 ghz PE5SC2001 PE5SC2001 PE5SC2001 rev 1.0 3.5mm male general purpose calibration kit component open circuit operating from dc to 26.5 ghz technical data sheet
2 # notes 1 keep provided protective blue caps installed when not in use. 2 store in climate controlled environment. 3 always keep connectors clean. 4 avoid touching the connector interface. 5 use caution when handling. 6 for female components, do not insert male pin greater than 0.037" [.94 mm]. failure to comply will result in damage to the female connector. 7 when mating, always ensure that the components to be interconnected remain in a fixed position while rotating only the coupling nut slowly to mate the connectors. 8 when de-mating, always ensure that the interconnected components remain in a fixed position while rotating only the coupling nut slowly to de-mate the connectors. 9 visually inspect the connector threads prior to use. if needed, clean the center conductor pin and outer conductor with alcohol to remove any debris that may be present. be sure to apply the alcohol in a circular motion with a lint-free cloth or applicator. 10 use at room temperature. 11 torque wrench provided is intended for 3.5mm connector types and is calibrated to 8 in-lbs. general instructions and usage notes PE5SC2001 PE5SC2001 rev 1.0 click the following link (or enter part number in search on website) to obtain additional part information including price, inventory and certifcations: 3.5mm male general purpose calibration kit component open circuit operating from dc to 26.5 ghz PE5SC2001 3.5mm male general purpose calibration kit component open circuit operating from dc to 26.5 ghz technical data sheet
3 compliance certifcations (visit www.pasternack.com for current document) rohs compliant reach compliant 06/16/2014 plotted and other data notes: ? values at +25 c, sea level 3.5mm male general purpose calibration kit component open circuit operating from dc to 26.5 ghz from pasternack enterprises has same day shipment for domestic and international orders. our rf, microwave and millimeter wave products maintain a 99% availability and are part of the broadest selection in the industry . click the following link (or enter part number in search on website) to obtain additional part information including price, inventory and certifcations: 3.5mm male general purpose calibration kit component open circuit operating from dc to 26.5 ghz PE5SC2001 url: http://www.pasternack.com/50ohm-3.5mm-male-calibration-kit-component-open-circuit-26.5-ghz-PE5SC2001-p.aspx PE5SC2001 PE5SC2001 rev 1.0 3.5mm male general purpose calibration kit component open circuit operating from dc to 26.5 ghz technical data sheet
4 ? 2014 pasternack enterprises all rights reserved PE5SC2001 rev 1.0 3.5mm male general purpose calibration kit component open circuit operating from dc to 26.5 ghz PE5SC2001 cad drawing
|
